• 1 CTRB Puller Cum Installer
    Supplier & Manufacturer of CTRB puller cum installer. Our product range also comprises of Induction Heaters, Tyre Induction Heater and Electric Induction Heater.
    CTRB puller cum installer
    Solonoid control valve for operation
    Easy & fast removal of CTRB (Cartridge Taper Roller Bearing) more than 80 CTRB per shift Safety valve, Pressure releif valve, Pressure control valve
  • 3 Hydraulic Bearing Extractor
    Our clients can avail from us a unique gamut of Hydraulic Bearing Extractor model: BWT with mobile workstation that is especially designed to inject oil under high pressure between the bearing bore and shaft seating, enabling the bearing to be pulled out floating on thin film of oil.

    The mobile workstation enables dismounting of direct mounted bearings without any damage or scoring to the bearing bore or shaft seating, with minimal force. This assortment of hydraulic bearing extractor with mobile workstation offered by us has become the standard equipment with the Indian railways for the purpose of dismounting of direct mounted spherical roller bearing fitted on the axles of ICF coaches and EMUs.
  • 4 Bearing Induction Heater
    Supplier & Manufacturer of Bearing Induction Heater. Our product range also comprises of Induction Heaters, Tyre Induction Heater and Electric Induction Heater.
  • 5 Induction Heater
    PRECISION Induction Heater - Series PIH SPL - is designed to heat the Bearings and other shrink-fit components prior to mounting using latest technology intelligent microcontroller based electronic controls.

    The life of Bearings and other torque transmitting steel components, which are shrunk-fit on shaft, may get cut short due to rough handling and faulty installation or mounting methods.

Our Products

Oil injection pump

Available with us is an array of hydraulic equipment like Oil Injector Pump (Model - Pie / 1001) that is primarily an oil injector pump that is designed to operate up to 3000 kg/cm2 giving adequate pressure for all normal dismounting applications.

System :
 • The pressure required to dismount bearing assemblies is 200 to 500 kg/cm2 range, and for torque-transmission joints is 800 to 1800 kg/cm2 range
• In optional case, the pressure required is 2500 to 3000 kg/cm2 is required

Application Area:
 • This system has diverse applications, starting from small components to extremely large ones with cylindrical or taper seats
• It is extensively used for mounting and dismounting components with interference fits which are transmitting large fluctuating loads, such as gears, flywheels, crankshafts, couplings and bearings

Mounting & Dismounting:
• Oil Injection System is the sole procedure of mounting and dismounting for shrunk fit components without causing any damage
• This method helps reduce, or almost eliminate the mounting and dismounting force